Product Description
Portable 4-Basin Tabletop Sink
A pre-plumbed sink kit with frame
All venues are not the same, and neither is your allotted space. Adaptable to your changing needs, this portable tabletop sink kit is compatible with a wide range of mobile vending environments—both indoor and outdoor.
Each compartment of the four-basin sink features bar drains with basket strainers that meet NSF standards*. And each pan is made from 22-gauge stainless steel, which is 23.5% thicker than similar 24-gauge pans†. (Seemingly counter intuitive, a lower gauge number indicates thicker metal.)
Hot and cold water stream through two gooseneck faucets: 6" and 12". With the commercial-style 12" spout, you have more space between the aerator and washbasin than comparable products fitted with residential-style faucets—making quick work of cleaning large pitchers, big bowls, and coffee carafes.
The sinks are contained within a composite cabinet frame (assembly required). And a removable splash-guard separates the hand sink from the wash, rinse, and sanitizer sinks.
Helping ease the flow of gray water and other liquids out of the basins, pre-plumbed vinyl tubing and four chemical-resistant drain traps complete this kit.
FEATURES:
- 4 Small hotel pans:See illustration in gallery for inside and outside dimensions
- meet NSF standards
- 22-gauge† stainless steel—lower gauge, thicker metal
- 18/8 composition
- rust-resistant
- Cabinet frame dimensions: 28 ½" D X 13 ½"W X 10"H
- 4 Beveled bar drains (see images in gallery)
- required by most health departments*
- faster draining
- 4 basket strainers—FREE
- 4 Drain traps
- polypropylene
- chemical-resistant
- noncorrosive
- pre-installed
- Vinyl drain lines with barbed fitting and hose clamps
- polypropylene
- chemical-resistant
- noncorrosive
- pre-installed
- 12" Commercial spout on hot and cold water faucet
- Hot and cold water are required by most health departments.*
- high-rise, tubular spout design adds more space to sink area—unlike similar products with low, residential-style spouts
- reaches 3 pans
- vacuum-plated chrome finish
- 6" Commercial spout on hot and cold water faucet
- Hot and cold water are required by most health departments.*
- high-rise, tubular spout design adds more space to sink area—unlike similar products with low, residential-style spouts
- vacuum-plated chrome finish
- Composite cabinet frame—assembly required
- resistant to stains, scratches and mold
- easy to clean
- all-weather compatible
- lightweight and easy to carry
- ideal for any counter-top
- For use in bars and restaurants, concession stands, mobile vending and catering carts, kiosks, and food trucks.
NOTE: Depending on the health department requirements in the area where your business is located, you may be obligated to purchase the following items before using this sink kit: portable hot water heater, portable water pump, clean and waste water tanks.
* Health department regulations are not the same in every city and state. Contact your local government agency to determine applicable requirements before purchasing any sinks or components.
†“Sheet Metal Wire Gauge Sizes Data Chart: Gage Sizes Table Chart: Engineers Edge.” Engineers Edge - Engineering and Manufacturing Solutions.Accessed October 19, 2019.https://www.engineersedge.com/gauge.htm.
Product Videos
Custom Field
Product Reviews
3 Reviews Hide Reviews Show Reviews
-
Portable sink mobile concession stand
Great product, fast delivery. I am very happy with the product
-
Overall great value
Arrived quicker than expected. The items were packed in a box within a box. Dont throw anything away till you have completely assembled as the screw bag was a little hard to find (I had 2 bolt & shoulder nuts missing) and the plexi-glass panel was between the outer box wall and an inner cardboard wall. the plexi-glass panel is not pre-drilled which is both good & bad. The faucets are camper quality. The sinks fit perfectly in the holding frame. The assembly of the frame was not difficult but took some examination as the instructions are 90% worthless. I am so glad it is mostly assembled as this made the overall application much easier. I've not had it in daily use yet but at this point I would recommend this product for many different applications. Thanks for the opportunity to share.
-
4 Bay Concession Sink
We ordered the sink and received it in about one week.
We opened the sink to find the sink and that was it, no splash guard as pictured in the photo, no hardware to hook things up.
It did have hoses and faucets as pictured. We did wind up investing another $60.00 for missing items.
We called customer service five or six times and were told by the computer that they cannot answer calls and would have to call back, finally after the sixth call a lady called back. She said she didn't know what came with it and check here we are. 3 weeks later and no call back,
We did figure out what to buy and did use it this past weekend and it was great. I would however recommend buying the parts you need as customer service is lacking.
